Low Profile Taper Balancer - Range 1.69" - 5.18" (Set of 7 pcs.) – MT-RSR

Low Profile Taper Balancer - Range 1.69" - 5.18" (Set of 7 pcs.)

$444.58
Wheel Balancing
9250-28
Bore Size
-
+

Description

Low Profile Taper Balancer - Range 1.69" - 5.18" (Set of 7 pcs.)

Fits: Hunter, Coats, Sunrise, Nationwide, Ranger, Ammco, Hoffman, Corghi, Cemb, K&L And many more. (Shaft size may vary per machine)

    Includes:

    Bore size 28mm 36MM 40MM
    Kit # 9250-28 9250-36 9250-40
    Range Individual Part Numbers
    1.69"-2.23" Cone 9251-28 9251-36 9251-40
    2.15"-2.58" Cone 9252-28 9252-36 9252-40
    2.50"-2.94" Cone 9253-28 9253-36 9253-40
    2.85"-3.28" Cone 9254-28 9254-36 9254-40
    3.20"-3.63" Cone 9255-28 9255-36 9255-40
    3.45"-4.36" Cone 9256-28 9256-36 9256-40
    4.24"-5.18" Cone 9257-28 9257-36 9257-40

     

    28mm Shaft Models:

    • Accuturn: 5100, 5223, 5500, 5600 (Serial #51-0001 To 51-0622)
    • Coats: 700, 800, 825, 850, 925, 950, 1000. 1025, 1050 And 1250 IBS2000 (Shaft Must Be Verified 28mm) And 6200HS
    • Mondolfo Ferro: All Models Excluding Truck Balancers
    • Norton: All Models
    • Snap-On: Shafts Must Be Verified 28mm
    • Sun: 1742 And 1762

    36mm Shaft Models:

    • Accuturn: 6100, 6600, 6800
    • Cemb: Pre 1995 Models
    • Coseng: C301, C311, C322, C366
    • Launch: 402, 412
    • Ranger: All Models

    40mm Shaft Models:

    • Accuturn: 1200, 1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650, 1820, 1850 (5100, 5323, 5500, 5600 With Serial #Ís 51-0623 To 51-1457)
    • Bear: 80-100, 80-303
    • Beisbarth: All Models
    • Bosch: All Models
    • CEMB: All Models 1995 And Later, (Excluding Truck Models)
    • Coats: (Previously Upgraded to 40mm Shafts) 700, 800, 825, 850, 925, 950, 1000, 1025, 1050, 1055, 1250, IBS 2000 (Shaft Must Be Verified 40mm), 1750, 1800, 1850, 775, 875, 1175, 6275HS, XR Balancers
    • Corghi: All Models 2007 And Later
    • FMC: All Models
    • Hofmann: All Models
    • Hunter: All Models
    • John Bean: All Models
    • Kwikway: All Models
    • Launch: 408, 500
    • Snap-On: Shaft Must Be Verified 40mm
    • Sicam: All Models

    Made in the U.S.A.