New Products

Hydraulic Power Unit for Lifts - Includes Reservoir  Hydraulic motor, reservoir, entire power unit for automotive lifts. May fit a variety of machi...

Wheel Spotter Dish/Plate for Auto Lifts Single Wheel Spotter Dish / Wheel Locator Plate for Auto Lifts 10-3/4″ x 15″ Wide Universal, for any lift...

Ken-Tool VALVECAPPER Pro Valve Core + Cap Tool (In Carded Retail Packaging) Makes it easier to check the inside dual tire Designed by a trucker to...

Hold Down Cone for Hunter TC - Auto 34/28, TC39   Interchangeable Part Numbers: RP6-1156, 192233

Autel MX-Sensor BLE Bluetooth TPMS Sensor Features and Benefits: Pre-programmed Bluetooth TPMS sensors for Tesla 3/Y/S/X models Tesla-ready: Just ...

XL Pressure Drum for Coats - 28mm Bore, 8 3/8 OD (8.375") O.D. Rubber Lip To Help Prevent Marring The Wheel. 40mm i.D. Interchangeable Part Numbers...

XL Pressure Drum for Coats - 28mm Bore, 8 3/8 OD (8.375") O.D. Rubber Lip To Help Prevent Marring The Wheel. 40mm i.D. Interchangeable Part Numbers...

MT-RSR Wheel Weight Rim Gauge Deciding which wheel weight to use is an important task! With our Wheel Weight Rim Gauge, you'll never have to guess ...

Tire Valve Stem Compatible with 21060, 20018, VS-950, 6207, 20008 Features: SELF TAPPING SCREW - VALVE COMES UNTHREADED Snap-In Type Valve Tool SE...

MT-RSR Mini Screwdriver with Magnetic Top Get the job done with a flat tip screwdriver featuring the MT-RSR brand. The fixed #0-1 standard blade is...

MT-RSR Branded Embroidered Snapback Trucker Cap Wear these trucker caps for increased breathability in the heat! Caps feature a medium profile and ...

Quick Nut Set for 40 MM Balancer Shaft with 5 MM Thread Pitch. Kit includes: Quick Clamp Wing Nut Pressure Cup Protector Ring Nut Bearing Fit the F...

Rubber Lift Pad/Puck for Tesla Model 3 (Pack of 4) This Jack / Lifting pad / puck for Tesla Model 3 is designed to fit snuggly into and hang from t...

RH Outer Cap Nut, Hino/Isuzu - Metric, M30-1.5 Thread Image may not show exact product dimensions. Thread - M30-1.5 Hex - 41mm Height - 25mm Interc...

RH Inner Cap Nut, Hino/Isuzu - Metric, M30-1.5 In., M20-1.5 Out. Weight 0.454 Grade  8.2 Finish Yellow Dichromate Outer Thread M30-1 1/2 ...

Rim Clamp/Jaw Protector Covers for Hunter TCX and Others Plastic Jaw Cover Protectors (4-Pack) for Many Tire Changers For Corghi, Cormach, Sice, Gi...

Hardware Rebuild Kit for Coats Grip-Max Plus Fits: Coats Grip-Max and Grip-Max Plus. Will likely fit Grip Max 2.0 Systems. Includes: (8) Shoulder B...

3" Aluminum Oxide Surface Conditioning Discs (Resin Back) 120 Grit 25 pack Aluminum Oxide offers average life on a hard, resin backing for longer l...

Corghi and Hunter TCX Inflator Air Gauge This Inflation Gauge is designed specifically for US market tire changers. This color coded dial gauge ena...

14.5" Cotton Swab Tire Lube Applicator Brush - Wire Handle Length 14-1/2" Use For Application of Tire Lube Interchangeable Part Numbers: X14378L,...

Autel MX 1-Sensor - with Metal Stem - ea 2-IN-1 Feature - Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and to...

Autel MX 1-Sensor - with Rubber Stem - ea 2-IN-1 Feature - Only 1 Sensor to service nearly every TPMS equipped vehicle to lower repair cost and t...

Nut Buddy Lug Nut Loosener Bust loose the most stubborn wheel nuts Use on commercial or agricultural wheels Gear ratio – 58:1 Rated output torque:...

Replacement Hydraulic Cylinder for Rotary Lift For Rotary Lift/Rack - QL4P100, QL4P101 - may fit others.  WARRANTY NOTICE:To ensure warranty consid...