11/16" OD Brass Hose Ferrule (Box of 10)

MiltonSKU: MIL-1654-7-10
0 reseña

Precio:
Precio de venta$10.06

Gastos de envío calculados en la caja

Stock:
Disponible
 Más opciones de pago

Descripción

11/16" OD Brass Hose Ferrule (Box of 10)

  • 9/16" Ferrule Outside Diameter
  • 0.562 Ferrule Inside Diameter

Brass hose ferrules are made to create custom hose assemblies. These ferrules have a 9/16" OD and a 0.562 ID. Note that rubber hose tolerances vary up to +/- 1/32" on both the ID and OD, so it is necessary to fit ferrules and fittings to each individual hose being assembled.

Height 0.62
Hose ID 1" x 0.562 ID
Hose OD 9/16" Hose OD
Hose Tolerance Allow +- 1/32" variance on ID and OD due to rubber hose
Key Feature Brass ferrules to make custom hose assemblies
Length 1

 

Interchangeable Part Numbers:

30937304285, 1654-3

Gastos estimados de envío

Payment & Security

American Express Apple Pay Diners Club Discover Google Pay Mastercard PayPal Shop Pay Visa

Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.

You may also like

9/16" OD Brass Hose Ferrule (Box of 10)9/16" OD Brass Hose Ferrule (Box of 10)
Precio de venta$8.11

SKU: MIL-1654-3-10

9/16" OD Brass Hose Ferrule (Box of 10)Milton
0 reseña
1/4" MNPT 1/4" ID Barb Swivel Hose End Fitting (Each)1/4" MNPT 1/4" ID Barb Swivel Hose End Fitting (Each)
1/4" MNPT 11/16" OD Reusable Hose End Fitting
Air Hose Fitting - 3/8" Barb, 1/4" MNPTAir Hose Fitting - 3/8" Barb, 1/4" MNPT
Large Bore Euro-Style Clip-On Air Chuck - 1/4" Hose Barb - Open
#12   11/16 TO 1 1/4 STANDARD HOSE CLAMP (Box of 10)
1/8" M NPT. End, 1/4" ID Hose
Precio de venta$1.81

SKU: MIL-600-3

1/8" M NPT. End, 1/4" ID HoseMilton
0 reseña
#10   9/16 TO 1 1/16 STANDARD HOSE CLAMP (BOX OF 10)
Flexzilla Air Hose Fitting, 3/8” Barb, ¼” MNPTFlexzilla Air Hose Fitting, 3/8” Barb, ¼” MNPT
#16   13/16 TO 1 1/2 STANDARD HOSE CLAMP ( BOX OF 10 )

Recently viewed

Lift Pad Kit   BendPak and Some Western
Dial Micrometer for Twin Cutter 6950 & 6900
Round Bit Tool Holder for Ammco (Left Hand)Round Bit Tool Holder for Ammco (Left Hand)
Small Taper Stud (B) for pin plate 3.7" Long for Wheel BalancerSmall Taper Stud (B) for pin plate 3.7" Long for Wheel Balancer
Hamaton TPMS Service Kit 6 103, Pack of 10, Schrader Gen 2/3
20 Piece Adaptor Set with 1" Bore for Brake lathe
Small Bell Clamp 3.62" Diameter   1" Bore