Descripción
Wheel Balancer 4 Cones System set - Range: 1.75" - 5.25" - 40mm Bore Hole
Bore size | 40MM |
Kit # | 2415-40 |
Range | Individual Part Numbers |
1.75"-2.75" Cone | 8476-40 |
2.44"-3.06" Cone | 8253-40 |
2.95"-3.63" Cone | 8252-40 |
3.375"-5.25" Cone | 2095-40 |
Spring | 8825 |
Fits the following wheel balancer brands:
40mm Shaft Models -
Accuturn - 1200, 1220, 1250, 1400, 1420, 1450, 1500, 1520, 1550, 1650, 1820, 1850 (5100, 5323, 5500, 5600 With Serial #s 51-0623 To 51-1457)
Bear - 80-100, 80-303
Beisbarth - All Models
Bosch - All Models
CEMB - All Models 1995 And Later, (Excluding Truck Models)
Coats - (Previously Upgraded to 40mm Shafts) 700, 800, 825, 850, 925, 950, 1000, 1025, 1050, 1055, 1250, IBS 2000 (Shaft Must Be Verified 40mm), 1750, 1800, 1850, 775, 875, 1175, 6275HS, XR Balancers
Corghi - All Models 2007 And Later
FMC - All Models
Hofmann - All Models
Hunter - All Models
John Bean - All Models
Kwikway - All Models
Launch - 408, 500
Snap-On - Shaft Must Be Verified 40mm
Sicam - All Models
MT-RSR Insights:
When selecting a cone, the range is determined by the center bore on the wheel you are trying to balance. For example, if your wheel center hole is 3" in diameter, make sure that 3" is within the range of the cone you are purchasing. ALL wheel balancers have one of four shaft diameters: 28mm, 36mm, 38mm, or 40mm. This determines the center bore of your cone for mounting on your machine. Use the above machine information for selecting the correct size.
This set will cover car to light truck vehicle sizes
Made in the U.S.A.
Gastos estimados de envío
Payment & Security
Su información de pago se procesa de forma segura. No almacenamos los detalles de la tarjeta de crédito ni tenemos acceso a la información de su tarjeta de crédito.
You may also like


SKU: 20-PROSB-40
MT-RSR SpeedPlate Pro System Standard Threaded Shaft with Storage BoardMT-RSR
SKU: 2095-40
Wheel Balancer cone - Range: of 3.375"-5.25" - For 40mm ShaftsMT-RSR
SKU: 2409-40
Wheel Balancer 3 Cones System Set - Range 1.75" - 3.63" - for 40mm Bore HolesMT-RSR
SKU: 9240-40
Balancer 4 Cones Set - Range: 1.169" - 3.28" - For 40mm ShaftsMT-RSR
SKU: 2061-40
Balancer Cone Set - Range: 5.875" to 7.31" with 7" Offset Spacer - 40mm Bore HoleMT-RSR
SKU: 29069-40
Wheel Balancer Cone - Range: 3.375" - 5.88" - 40mm Bore HoleMT-RSRRecently viewed


SKU: 15-1620-50
License Plate Screw -14 x 3/4" - 3/8" Head w/ Flathead - 1/2" Washer - 50 pkMT-RSR
SKU: 83308B
301 Series Die Grinders 0.33 HP, 1/4 in NPT(F); 6.00 mm, 25,000 rpm, 0.33 hpIngersoll-Rand