Lifting Equipment

BendPak Rubber Pad Kit (1 pad with Bracket) Fits the following brands: BendPak & Some Western MT-RSR Insights: 1-3/8” (35mm) OD Pin x 1-13/16” ...

Slip Over Rubber Arm Pad (Pack of 4) Fits the following brands: 5 5/8 X 5 5/8 X 1 1/16 BendPak Models: MX-12C MX-15C MX-18C All MX Models MT-RSR In...

Rubber Pad 5" for BendPak Fits Models: BendPak And Dannmar LiftsOverall Size (US Standard): 5" x 5" (5.0 in round) Bottom side: 4-3/8" ID with LipO...

Rubber Arm Pad for Benwil & Bishamon (Pack of 4) Fits the following models: T-PRO-7, 7W, 7L,7WL , BWO-7 ,7W 7L ,GP0A-8, GPOA9, GPOA10,TP-7, TPO...

Rectangular Rubber Arm Pad for Ammco, Ben Pearson, Challenger, Tuxedo, Many other Lifts. (Pack of 4) 3 7/8" x 4 7/8" x 7/8" Fits the following mode...

Rubber Arm Pad for Rotary (Pack of 4) These are a set of four rubber pads that can be used as replacements for Rotary Lifts. They are compatible wi...

Standard Round Rubber Arm Pad for Challenger, Quality, Launch lifts. (Pack of 4) Dimensions; 5.437 x 4.750 Made in the U.S.A. Interchangeable Part...

Rubber Arm Pad for ALM (Pack 0f 4) 6-5/16” ODBottom Dimensions: 5-7/8” ID with Lip Interchangeable Part Numbers: OEM: AMLP-0127, LP616, LP-616, TMR...

Rubber Arm Pad for Challenger & VBM, many others (Pack 0f 4 with Hardware) Dimensions; 6 1/8" x 6 1/8" x 1/2" between Bolt Holes 3" Fits the fo...

Rubber Arm Pad for Challenger and Quality Lifts (Pack of 4 with fasteners) Dimensions; 4" x 4" x 7/16" Made in the U.S.A. Interchangeable Part Num...

Enhance the safety and efficiency of your automotive service operations with the Universal Low Profile Rubber Riser Pad. Measuring 18 inches by 12 ...

Universal Rubber Blocks 4-3/4”X 6-1/4” 1-1/2” Thick - Pack of 4 Interchangeable Part Numbers: LP615, BH-9756-86, FJ2427, J2427, 2427, TMRLP615

BendPak and Some Western Pad is molded onto the mount Dimensions: 3 7/8" x 4 7/8" x 7/8" Interchangeable Part Numbers: LP600, TMRlp600, BH7475-4, T...

Replacement Rubber Pad Kit and Hardware for Bend Pak and Globe GV series Fits Models: BendPak & Globe GV Series LiftsOverall Size (US Standard)...

Introducing our Heavy Duty Rubber Arm Pad Kit, specially designed for Challenger Lifts to enhance safety and protection during vehicle lifting oper...

Enhance your automotive lift's performance with our Octagon Fabric Reinforced Forward Rubber Arm Pads. This pack of 4 pads is designed to provide d...

Octagon Rubber Arm Pad for Forward, Raptor, Texas Lifts, and Many Others (Pack of 4) Dimensions; 5" x 5" x 1/4" Use the 6507-4 for Fabric Reinforce...

Universal Rubber Block 6-1/4" X 4-3/4" 3” Thick – Pack of 4  Interchangeable Part Numbers: BH-9756-87, 9756-87, FJ2428X, J2428X, 2428X, LP613,TMRLP...

X-Pattern Rectangular Slip-Over Rubber Arm Pad for Western, Grand & Worth Lifts (Pack of 4) These high-quality rubber pads are specifically eng...

Nussbaum, Force, Hydra lift, Globe, Smith Rubber Arm Pad Bolt-On Round (Pack of 4) Dimensions; 5" dia x 1" 3 7/16" Between Holes Made in the U.S.A...

Slip-On Round Rubber Arm Pad for Force (Pack of 4) Bottom side with lip. Dimensions;  4 9/16" x 1 1/16" Made in the U.S.A. Interchangeable Part Nu...

Round Rubber Arm Pad for Challenger, Quality with Center Bolt Hole(Pack of 4) Will fit 26K25010 Arm Support MT-RSR Insights: Dimensions;  4.750 x 1...

Heavy Duty Square Rubber Arm Pad for Challenger and Quality Lifts (Pack of 4) Dimensions; 4.00" x 4.00" x .375" Made in the U.S.A. Interchangeable...

Bolt-On Octagon Rubber Arm Pad for Western without Center Hole (Pack of 4) For use on lifts after date 01-01-2000 These rubber pads are designed to...